Sony SHAKE-X70D Operating Instructions Manual page 62

(Except for Latin American,
• •
European, and Russian models)
Make sure you set the color
system correctly, according to your
TV's color system.
Picture noise appears.
Wipe the disc clean (page 67).
• •
If video signal from your system
• •
has to go through your VCR to
your TV, the copy-protection
applied to some DVD VIDEO
programs could affect the picture
quality.
(Except for Latin American,
• •
European, and Russian models)
When you play back a VIDEO CD
recorded in a different color
system from the one you set to the
system, the picture image may be
distorted (page 23, 33).
(Except for Latin American,
• •
European, and Russian models)
Set the color system to match your
TV (page 23, 33).
The aspect ratio of the TV screen
cannot be changed.
The aspect ratio is fixed on your
• •
DVD VIDEO and video file.
Depending on the TV, you may not
• •
change the aspect ratio.
The language for the sound track
cannot be changed.
Multilingual tracks are not
• •
recorded on the DVD VIDEO being
played back.
The DVD VIDEO prohibits changing
• •
the language for the sound track.
The subtitles language cannot be
changed.
Multilingual subtitles are not
• •
recorded on the DVD VIDEO being
played back.
The DVD VIDEO prohibits changing
• •
the subtitles.
62
GB
The subtitles cannot be turned off.
The DVD VIDEO prohibits turning
• •
off subtitles.
The camera angles cannot be
changed.
Multi-angles are not recorded on
• •
the DVD VIDEO being played back.
The DVD VIDEO prohibits changing
• •
the angles.
Tuner*
There is severe hum or noise, or
stations cannot be received.
Connect the antenna properly.
• •
Change antenna location and
• •
its orientation to obtain good
reception.
Turn off nearby electrical
• •
equipment.
* Radio may not be received depending
on the radio wave conditions or the
housing environment in your area.
BLUETOOTH device
Pairing cannot be performed.
Move the BLUETOOTH device
• •
closer to the system.
Pairing may not be possible if
• •
other BLUETOOTH devices are
present around the system.
In this case, turn off the other
BLUETOOTH devices.
Make sure to enter the correct
• •
passkey when selecting the
system's name (this system) on
the BLUETOOTH device.
The BLUETOOTH device cannot
detect the system, or "BT OFF"
appears on the display.
Set the BLUETOOTH signal to "BT
• •
ON" (page 44).