Operation
3
4
Figure 8
1. Motion control
lever-neutral lock position
2. Center un-lock position
Backward
1.
Move levers to the center, un-locked position.
2.
To go backward, slowly pull the motion control
levers rearward (Fig. 8).
To go straight, apply equal pressure to both motion
control levers (Fig. 8).
To turn, release pressure on the motion control lever
toward the direction you want to turn (Fig. 8).
To stop push the motion control levers to neutral.
Stopping the Machine
To stop the machine, move the traction control levers
to neutral and separate to lock, disengage the power
take off (PTO), and turn the ignition key to "OFF" to
stop the engine. Also set the parking brake when you
leave the machine; refer to Setting the Parking Brake,
page 24. Remember to remove the key from the
ignition switch.
28
2
1
m–2715
3. Forward
4. Backward
POTENTIAL HAZARD
Someone could move or attempt to operate
the tractor while it is unattended.
WHAT CAN HAPPEN
Children or bystanders may be injured if
they use the tractor.
HOW TO AVOID THE HAZARD
Always remove the ignition key and set the
parking brake when leaving the machine,
even if just for a few minutes.
Instruments
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine is
running. Use these times for scheduling regular
maintenance.
Figure 9
1. Hour meter
1
m–4202