Specifications - Stihl FS 410 C-M Instruction Manual

Specifications

EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
Engine
Single cylinder two-stroke engine
FS 410 C
Displacement: 41.6 cc
Bore: 42 mm
Stroke: 30 mm
Engine power to 2.0 kW (2.7 bhp)
ISO 8893: at 9,000 rpm
Idle speed: 2,700 rpm
Cut-off speed (rated): 12,300 rpm
Max. output shaft
speed (cutting
attachment): 10,130 rpm
FS 410 C-M, FS 460 C-M
FS 460 C
Displacement: 45.6 cc
Bore: 44 mm
Stroke: 30 mm
Engine power to 2.2 kW (3 bhp)
ISO 8893: at 9,500 rpm
Idle speed: 2,700 rpm
Cut-off speed (rated): 12,300 rpm
Max. output shaft
speed (cutting
attachment): 10,130 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor NGK CMR6H
type):
Electrode gap: 0.5 mm
This spark ignition system meets all
requirements of the Canadian
Interference-Causing Equipment
Standard CAN ICES-2/NMB-2.
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity: 750 cc (0.75 l)
Weight
Dry, without cutting attachment and
deflector
Overall length
without cutting attachment
Features
C Convenience features
E Easy2Start
K Short drive tube
M M-Tronic
Z Spark arresting screen
8.4 kg
English
1675 mm
37