Fisher & Paykel WA42T26GW1 Installation Instructions And User Manual page 27

Press START/PAUSE and hold down. Press POWER.
1
The diagram below shows how the lights relate to the options you can change. It also shows
2
which lights will be on when you first enter the Option Adjustment Mode.
Controlled Cold
Wash
Less Water
Automatic Water Level Adjustment
Use the buttons on the panel to change the pre-set options.
3
Changing pre-set options
Fig.34 Entering Option Adjustment mode
Rinse Spin
Out of
Balance
More Water
Recovery
Fig.35 Option adjustment
More 2 Deep
More –
Standard Spray & Deep
Delay
Start
Shower Rinse
Rinse Options
Volume
Fig.36 Option adjustment selection
15 Hot More
5 Warm More
None Cold Standard
Beeps
Spray
Rinse Options
Volume
Lid Locked
2 Deep
–
Spray & Deep
Rinse
US
25
CA