Power Supply Adapter; Audio Signal Connections - Cambridge SoundWorks FourPointSurround FPS2000 Installation And Operating Instructions Manual

Power Supply Adapter

Confirm that the power switch is
in the "OFF" position. Insert the
power supply's AC plug into the
appropriate receptacle. Insert the
small DC connector into the
"15V DC IN" receptacle on the
back of the subwoofer
(see diagram I).
I

Audio Signal Connections

The FPS2000 Digital comes with a
front/rear audio signal cable.
Connect this cable between your
sound card and the subwoofer
(see diagram J).
1. Insert one of the green
miniplugs into the green
minijack (LINE OUT) on your
sound card.
2. Insert the corresponding black
miniplug into the black
minijack (REAR OUT) on your
sound card.
3. Insert the green miniplug at
the other end of the cable into
the green minijack (FRONT)
on the subwoofer.
4. Insert the black miniplug into
the black minijack (REAR) on
the subwoofer.
J
FPS2000 Digital Subwoofer
Note: If you have a stereo sound
card (one without a rear stereo
minijack line output), connect a
green miniplug cable to the LINE
OUT minijack of your sound card
and the opposite green miniplug
to the FRONT minijack on the
subwoofer. This will cause both
left front and left rear satellites to
play the left stereo channel and
both right satellites to play the
right stereo channel.
SOUNDCARD OUTPUT
(EXAMPLE-SOUND BLASTER LIVE! AUDIO CARD)
REAR LINE
OUT OUT
7