Lenovo s200 Hardware Maintenance Manual page 94

6. Remove the two screws that secure the computer handle, and then remove the computer handle
as shown.
Figure 17. Removing computer handle
7. Insert the two ends of the computer handle into the corresponding holes in the chassis, and then
pivot the computer handle as shown so that the two screw holes in the computer handle align with
the corresponding screw holes in the chassis.
Figure 18. Installing the computer handle
8. Install the two screws to secure the computer handle.
Figure 19. Installing the computer handle screws
9. Install the power button board. See "Replacing the power button board" on page 85.
10. Install the front bezel. See "Replacing the front bezel" on page 83.
88
Lenovo S200 Hardware Maintenance Manual