Product Overview; Controls - Toro 74282 Operator's Manual

Product Overview

1. Motion control lever
2. Parking brake lever
3. Height-of-cut lever
4. Fuel cap (both sides)
Figure 3

5. Controls

6. Seat belt
7. Roll bar
Controls
Become familiar with all the controls before you start the
engine and operate the machine (Figure 3 and Figure 4).
1. Gas cap
2. Choke
3. Ignition switch
Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running.
Use these times for scheduling regular maintenance
(Figure 4).
Throttle Control
The throttle control has two positions: Fast and Slow.
Choke
Use the choke to start a cold engine.
Blade Control Switch (PTO)
The blade control switch (PTO) is used to engage the
electric clutch to drive the mower blades with the motion
control levers in the center, un-locked position. Pull the
switch up to engage the blades and release. To disengage
the blades, push the blade control switch (PTO) down.
Ignition Switch
This switch is used to start the mower engine and has
three positions: Start, Run and Off.
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
12
Figure 4
4. Throttle
5. Power take off (PTO)
6. Hour meter