Parking Brake Adjustment - Yamaha RAPTOR YFM660RR Owner's Manual

1. Locknut
A. Cable length
1. Contre-écrou
A. Longueur de câble
1. Contratuerca
A. Longitud del cable
1. Locknut
1. Contre-écrou
1. Contratuerca
2. Adjusting bolt
2. Boulon de réglage
2. Perno de ajuste
2. Adjusting bolt
2. Boulon de réglage
2. Perno de ajuste

Parking brake adjustment

Parking brake adjustment may be required if the
parking brake does not hold properly. The cable
length A should be adjusted to 64–68 mm.
1. Fully loosen the locknut and the adjusting bolt
at the clutch lever.
2. Loosen the locknut and the adjusting bolt at
the rear brake caliper.
3. Turn the adjusting bolt at the clutch lever in
direction a to increase the cable length or in
direction b to decrease the cable length.
NOTE:
_
If the cable cannot be adjusted to specification,
consult a Yamaha dealer.
_
4. Tighten the locknut at the clutch lever.
8-73
EBU01192