2) Using the MicroWorks II as a sound system for a
component CD player.
Typically, there are two RCA-type jacks (one red,
one white) on the CD player. To connect to these
jacks, obtain a stereo signal cable with two RCA
plugs on one end and a 3.5 mm stereo minijack at
the other end. Connect the RCA plugs to the RCA
jacks on the player. Connect the Volume On/Off
Control green miniplug to the minijack of the
adapter.
Green miniplug from
Volume On/Off control
One 3.5 mm stereo miniplug to two RCA plugs
Green miniplug from
Volume On/Off control
Signal Cable
Minijack to minijack adapter
Signal Cable
One 3.5 mm stereo minijack to two RCA plugs
14
COMPONENT CD OUTPUT
RIGHT LEFT
OR
RIGHT LEFT
OUT
OUT