Using The Projector; Connecting To An Antenna Or Cable - LG PH450U Owner's Manual

30
USING THE PROJECTOR
USING THE PROJECTOR
Connecting to an Antenna or Cable
To watch TV using an indoor/
outdoor antenna, connect a wall
terminal and the
the Projector using an RF cable
(75 Ω).
You can watch terrestrial or cable
(analog or digital) TV.
(The RF cable is sold separately.)
NOTE
• Make sure not to bend the copper wire of the RF cable (75 Ω). Turn
the input jack to the right to fasten it.
Copper wire
•
Ensure you use a standard coaxial cable (75 Ω, sold separately)
when connecting to the projector input.
• For better image quality in locations where signal strength is low,
purchase and install a signal amplifier (booster).
• A signal splitter is required if you want to use two or more projectors
through one antenna.
• If you have any problems when installing the antenna, please consult
a suitable retailer or the store where you purchased the antenna.
port of