Toshiba E-STUDIO352 Printing Manual page 205
Multifunctional digital systems
Hide thumbs
Also See for E-STUDIO352:
- Network fax manual (126 pages) ,
- Quick start manual (92 pages) ,
- Service handbook (764 pages)
Table of Contents
Advertisement
1
Select the printer driver in the Printers and Faxes folder. Then click
[File] and select [Properties].
When you are operating under Windows 98/Me/NT 4.0/2000/Vista, open the Printers
folder to access the printer driver.
When using Windows Vista, click [Start], select [Control Panel], and click [Printer]
under [Hardware and Sound] to open the Printers folder.
The printer driver properties dialog box appears.
2
Display the [Configuration] tab, check on "Enable SNMP Communi-
cation", and click [Update Now].
The printer driver starts communicating with system and obtains option settings auto-
matically.
If the connection to the equipment has not been configured correctly, the message "The
address of your printer could not be located. Would you like to find it?" will be displayed.
If it is displayed, click [Yes] and search for the equipment using the TopAccessDocMon
Local Discovery dialog box. After searching the equipment, SNMP communication will
be enabled.
Before Using the Printer Driver
203
Advertisement
Table of Contents
