Important Safety Instructions - First Act Discovery FD149 Instruction Manual

Important Safety Instructions

Please read this section carefully.
1. Read and follow these instructions.
2. Do not use this device near water.
3. Clean only with a dry cloth.
4. Do not use near any heat sources such
as radiators, heaters, stoves, or
other heat producing machinery.
5. If you use a power cord, protect it
from being walked on or pinched
particularly at plugs and at the point
where it exits from the keyboard.
6. Only use the attachments/accessories
specified by the manufacturer.
7. Unplug the keyboard during lightning
storms or when unused for long
periods of time.
8. Refer all servicing to qualified service
personnel. Servicing is required when
the keyboard has been damaged in
any way, such as power supply cord or
plug is damaged, liquid has been
spilled or objects have fallen into the
keyboard, the keyboard has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
9. To reduce the risk of fire and electric
shock, do not expose this apparatus
to rain or moisture.
WARNINGS
1. The pressure and polarity of the
electric adaptors used should conform
to the keyboard specifications to
avoid heat and damage to it. Turn off
the electricity, unplug the adaptors,
and have the product repaired by
professionals if any of the following
occurs: wires or plugs are worn,
torn or damaged; strange smells or
smoke appears; the instrument
suddenly becomes silent when
being played.
2. Do not change the parts without
professional instructions. Any change
may cause malfunctions.
3. When the keyboard is not in use, turn
off the power and unplug the
keyboard to avoid damage to inner
components or fires caused by being
electrified too long.
4. Keep the wrapping bag out of the
reach of children to avoid a choking
hazard.
5. Always move the keyboard carefully to
avoid damage to outer covering and
inner components.
6. The keyboard should not come in
contact with acid or alkali. It should
not be operated where there is
corrosive or excessively moist air
around to avoid corrosion of the
electrical contacts.