Connect Your Wireless Devices - D-Link DAP-1620 Quick Install Manual

Connect Your Wireless Devices

From your wireless device go to the Wireless Utility to display the available
5
wireless networks.
Extended
network
Original
network
The SSID on the DAP-1620 will automatically be assigned the following:
• 2.4GHz (Your Router's SSID)-EXT
• 5GHz (Your Router's SSID)-EXT5G
The Wi-Fi password for the DAP-1620 will be the same as your router.
Repeat step 5 to connect additional Wi-Fi devices to the DAP-1620.
6
Your device is now connected to the DAP-1620 and can connect to your
wireless router. If you want to change your network settings, password, etc.,
follow the steps on the next page to configure the DAP-1620. To connect
additional devices, repeat step 5.
Your setup is complete!
6 DAP-1620 Install Guide