Connecting to wired networks
You can also connect to wired networks, such as local area networks
and broadband Internet connection, using your Notebook PC's LAN
port.
NOTE: Contact your Internet Service Provider (ISP) for details or
your network administrator for assistance in setting up your Internet
connection.
To configure your settings, refer to the following procedures:
IMPORTANT! Ensure that a network cable is connected between your
Notebook PC's LAN port and a local area network before performing the
following actions.
Configuring a dynamic IP/PPPoE network connection
1.
2.
3.
or
4.
5.
6.
NOTE: Proceed to the next steps if you are using PPPoE connection.
62
Launch Settings.
Select Network & Internet.
Select Ethernet > Network and Sharing Center.
Select your LAN then select Properties.
Select Internet Protocol Version 4 (TCP/IPv4) then
select Properties.
Select Obtain an IP address automatically then
select OK.
Notebook PC E-Manual