Sony VPL-VW365 Operating Instructions Manual page 32

Setting items
3D Depth Adjust
Simulated 3D
Effect
Dynamic Range
Test Pattern
Settings Lock
Description
For adjusting the depth of the 3D video images on the screen. The
setting can be made only when a 3D Format other than "Simulated 3D"
is selected.
Depth
Front
We recommend that "3D Depth Adjust" be set to "0." The 3D video
images may be difficult to perceive, depending on the setting of "3D
Depth Adjust."
For adjusting the 3D effect when 2D content is converted to 3D video
images. You can select the effect from among "High," "Middle," and
"Low."
Tip
There are differences in perception of 3D video images converted by the
simulated 3D function among individuals.
Sets the video input level for HDMI 1 and HDMI 2 connectors.
Auto: Sets the video input level automatically.
Limited: The video input level is set for signals of 16-235.
Full: The video input level is set for signals of 0-255.
Note
If the video output setting of the connected HDMI device is not set
correctly, light and dark parts of the video may appear too light or too
dark.
Displays a test pattern according to the setting.
On: A test pattern appears on the screen to be used when adjusting the
lens with "Lens Focus," "Lens Zoom," and "Lens Shift."
Off: A test pattern does not appear.
Tip
While the test pattern is displayed, it is only displayed in green to allow
you to adjust the focus easily.
Locks menu item settings to prevent operational error (page 33).
Off: Cancels the Settings Lock.
Level A: Group 1 items (below) are not displayed on the menu, and are
not available.
Level B: Group 1 and Group 2 items (below) are not displayed on the
menus, and are not available.
Normal
32
Depth