Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold); To Omit The Spin Between Rinses And The Final Spin - Miele WT 2798 i WPM Operating Instructions Manual

WASHING

Final spin speed

Programme
Cottons
Minimum iron
Denim
Woollens
Express 20
Shirts
Automatic plus
Dark garments
Delicates
Sportswear
Trainers
Outerwear
Proofing
Soft toys
Hygiene
First wash
Silks
Pillows
Curtains
Separate rinse
Starch
Drain / Spin
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.

Rinse and interim spin

There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. In some
programmes, an additional rinse is
introduced if a spin speed of less than
700 rpm is selected.
26

To omit the final spin (Rinse hold)

^ Select the Rinse hold Extra.
rpm
1600
– To start the final spin:
1200
The machine will display the
900
previously set spin speed. You can
1200
change this to a different spin speed
1600
if you wish. Start the final spin by
600
pressing the Start/Stop button.
1200
– To end the programme:
1200
Press the Door button. The water will
600
drain away. Press the Door button
1200
again to open the door.
1000
800
To omit the spin between rinses and
1000
the final spin
900
^ Select the No u option.
1600
1200
The laundry is not spun after the final
600 rinse. The water will drain away and the
machine will go straight into the
1200
anti-crease stage.
600
With some programmes an additional
1600
rinse is introduced if this setting is
1600
selected.
1600