Connecting An External Monitor To The Port Replicator - Fujitsu LIFEBOOK T904 Operating Manual

Connecting external devices

Connecting an external monitor to the Port Replicator

An analog monitor is connected to the analog VGA monitor port, a digital monitor to the DisplayPort
or to the DVI-D monitor port on the optional Port Replicator. Monitor output is limited to a maximum
of two monitors at any one time (see
Monitorport Monitorport VGAconnection socket Monitor
Digital DisplayPort
Digital DVI-D monitor port
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch between the external monitor and the LCD monitor of the
notebook, see chapter
You can display the same picture on the external monitor and the
notebook LCD monitor simultaneously.
82
"Key combinations", Page
Analog VGA monitor port
"Key combinations", Page
40, section "Toggle output monitor").
40.
Fujitsu