Using The Attachments - Kenwood FPM250 series Instructions Manual

to use your mini chopper/mill
blade unit
sealing ring
jar
Use the mini chopper/mill for milling herbs, nuts and coffee
beans.
1 Put the ingredients into the jar
2 Fit the sealing ring into the blade unit
3 Turn the blade unit upside down. Lower it into the jar, blades
down.
recommended speed chart
tool/attachment
knife blade
dough tool
twin beater geared metal whisk
discs - slicing/grating
rasping disc (if supplied)
citrus juicer (if supplied)
liquidiser
mini chopper/mill (if supplied)
centrifugal juicer (if supplied)

using the attachments

Refer to recommended speed chart for each attachment.
knife blade
The knife blade is the most versatile of all the attachments. The
length of the processing time will determine the texture achieved.
For coarser textures use the pulse control.
Use the knife blade for cake and pastry making, chopping raw
and cooked meat, vegetables, nuts, pate, dips, pureeing soups
and to also make crumbs from biscuits and bread.
hints
l
Cut food such as meat, bread, vegetables into cubes
approximately 2cm/3/4in before processing.
l
Biscuits should be broken into pieces and added down the feed
tube whilst the machine is running.
l
When making pastry use fat straight from the fridge cut into
2cm/3/4in.cubes.
l
Take care not to over-process.
(if supplied)
.
.
function
Cake making
Rubbing fat into flour
Adding water to combine pastry ingredients
Chopping & pureeing
Thick soup mixes (600ml liquid to 600g dry
ingredients). Process vegetables with
300ml water until finely chopped, add
the remaining water until incorporated.
Thinner soup mixes/milk
Yeasted mixes
Egg whites
Cream
Firm food items such as carrots, hard cheeses
Softer items such as cucumbers, tomatoes
Parmesan cheese, Potato for German
potato dumplings
Citrus fruits
All processing
Herbs
Nuts, coffee beans
Uncooked meat - beef steak - cut into 2
Hard fruit and vegetables ie carrots and apples
Soft fruit ie tomatoes and grapes
4 Screw the blade unit onto the jar until finger tight
graphics on the underside of the blade unit as follows:
- unlocked position
- locked position
5 Place the mini chopper/mill onto the power unit, align the
the mini chopper/mill with the
clockwise µ to lock
6 Switch onto maximum speed or use the pulse control.
hints
Herbs are best milled when clean and dry.
speed
1 – 2
2
1 – 2
2
start on 1 and
increase to 2
2
2
1 – 2
2
1
2
1
2
2
2
⁄ cm cubes 2 (5 secs)
1
2
2
1
dough tool
Use for yeasted dough mixes.
l
Place the dry ingredients in the bowl and add the liquid down the
feed tube whilst the machine is running. Process until a smooth
elastic ball of dough is formed this will take 60 secs.
l
Re-knead by hand only. Re-kneading in the bowl is not
recommended as it may cause the processor to become unstable.
twin beater geared whisk
Use for light mixtures only eg egg whites, cream, evaporated milk
and for whisking eggs and sugar for fatless sponges. Heavier
mixtures such as fat and flour will damage it.
using the whisk
1 Fit the bowl onto the power unit, add the detachable drive shaft.
2 Push each beater securely into the drive head.
3 Fit the whisk by carefully turning until it drops over the drive shaft.
6
on the power unit and turn
.
maximum
capacities
1.2Kg/2lb 6oz total weight
300g/11oz flour weight
400g/14oz chopping lean
meat total weight
1.2 litres/1 pt 16 fl oz
600 ml/18 fl oz
340g/12oz flour weight
4
250 ml/7 ⁄ fl oz
1
2
–
–
–
–
1.2 litres/1 pt 16 fl oz
10g/ ⁄ oz
1
2
50g/2oz
50g/2oz
800g/1lb 12oz
500g/1lb 2oz
. Refer to the
on