Cambridge Audio Upsampling Digital to Analog Converter azur DacMagic User Manual page 9

– use a high quality TOSLINK fibre-optic interconnect cable designed specifically for
audio use. To achieve the best results we always recommend using high quality Cambridge Audio
leads, which are guaranteed for life.
These outputs are pass-through only; there is
the LPCM input signal.
The DacMagic is fitted with two sets of digital inputs which enable the connection of source
components. Each input has both S/P DIF and TOSLINK types fitted.
Only one of the two types for each input should be connected at any one time. If both the optical and
co-axial outputs have connections made to them (even if only one is attempting to function),
will work.
– to obtain best results, use a high quality 75 ohm digital RCA interconnect cable (not
one designed for normal audio use).
– use a high quality TOSLINK fibre-optic interconnect cable designed specifically for
audio use.
This unit only accepts two-channel LPCM digital audio (e.g. Dolby Digital 2.0). You cannot
connect a Dolby Digital 5.1 or a DTS signal as they will not be recognised. If you wish to connect a DVD
or similar device, please ensure that the sound output of your player is set to two-channel PCM.
USB 'Type B' input allowing direct connection to a PC via a Type B to Type A USB lead. The DacMagic's
operation is independent of your PC soundcard – it will operate whether your PC has a soundcard
or not.
Once you have completed all connections, plug the supplied power adaptor into the DacMagic.
azur
upsampling or any other modification done to
DacMagic
9