Operating Instructions - Viking VDW302 Use & Care Manual

Operating the Dishwasher
If you do not perform any operation after seitching on the machine,
1. On/Off Button
2. Program Selection /Program Cancel Button
3. Function Buttons & Indicators
F1 Half Load
F2 Sanitize
F3 HighGloss
F4 Intense Wash
4. Program Indicator
• Open the door and load the dishwasher.
• Check that both upper and lower spray arms move freely.
• Pour correct amount of detergent into the detergent dispenser and close the lid.
• Push in the On/Off button 1 and check that the display lights come on.
• Check the rinse agent level indicator 12. If necessary, refi ll the rinse agent.
• Check the salt level indicator 5. If necessary, refi ll salt (select models).
• Use the Program Selection Button 2 to choose your washing program.
• When there are few dishes, additionally use the Half Load function (F1).
• Select other desired functions.
• Close the door and the program will start.
• When the wash program has ended, an electronic beep will sound and will continue every 10 seconds. After two minutes of
elapsed time, the sound will stop. The beep can also be stopped by opening the door or by pressing the On/Off button 1.
• Press the On/Off button 1 and open the door after the program is completed. The indicator lights will go off .
• Allow your dishes to cool for 15 minutes, with the door open.
• Unload the dishes. Begin with the lower rack.
Floor Lighting Indicator
Your dishwasher will light the fl oor during the wash operation. The light will turn off automatically at the end of the washing
operation. NOTE: When the washing program begins, the light indicator feature activates itself automatically and will
automatically turn off at the end of the cycle. This feature is an option that cannot be turned off by the consumer.
CAUTION
Hot steam can escape! Danger of serious burns or other
NOTICE
it will be automatically switched off within 5 seconds.
injury.
6
11 10
5. Salt Indicator (depending on model)
6. Start/Cancel Indicator
7. Time Delay / Program Time Indicator
8. Time Delay Button
9. Time Delay Indicator
10. End of Program Indicator
11. Sanitized Indicator
12. Rinse Aid Indicator
Avoid opening the door during the wash cycle. This
interrupts the washing process, and hot steam will escape.
Hot steam can cause burns and other serious injuries.
When the door is closed, the program will continue.
11
CAUTION