Table of Contents
Advertisement
402051 REV2.qxp_Layout 1 09/03/2015 16:09 Page 10
•
WARNING: Lifting the Serrator Blade out of the
food while running, or using a high speed
setting in a small pan could splash hot liquid.
Extra care should be taken when using the
Hand Blender in this manner.
•
Do not insert the Hand Blender into the food
past the join between the Main Unit
Blending Leg (5).
•
Ensure the power cable does not touch any hot
surfaces (including the side of the pan).
Hints & Tips
•
When blending foods with strong colour (eg.
carrots), the plastic parts of the appliance may
become discoloured. Wipe with cooking oil to
clean any discoloured parts. Wash thoroughly in
hot soapy water before re-using.
•
When blending using the Blending Leg (5), start
the process by inserting the Blending Leg into the
ingredients. This will ensure all the ingredients are
pulled into the blade to be processed. Gently
rotate the Blending Leg, lifting it up and down in
the ingredients. Continue this movement until the
mixture is of the desired consistency. Do not
remove from the liquid while the blades are in
motion.
•
Do not lift the Blending Leg out of the mixture
completely when running, as splashing may
occur.
•
While using the Chopping Bowl
need to scrape the sides of the bowl down using
a silicone spatula partway through blending.
Care and Cleaning
•
WARNING: Always unplug the appliance from the
mains socket before cleaning and maintenance.
•
WARNING: Handle the blades with care as they
are sharp.
•
Wash all parts except the Main Unit (4), Blending
Leg (5), Chopping Bowl Blending Lid
Gearbox
(13)
in hot soapy water before use. Dry
all parts thoroughly before use.
•
Do not fully submerge the Blending Leg in water.
Wash only the Serrator Blade head (6).
•
Wipe the Chopping Bowl Blending Lid with a hot
damp cloth to clean. Do not immerse in water.
•
Clean the Main Unit with a damp cloth and dry all
the parts thoroughly.
•
WARNING: Never immerse the Main Unit in water
or any other liquid.
1
Paddle (15)
•
For ease of cleaning the Paddle in the Potato
Masher Attachment
(4)
and the
•
To remove, unplug the Main Unit
power supply. Do not disconnect the Potato
Masher from the Main Unit.
•
Hold the Main Unit in your hand. Grip the
Paddle and twist clockwise. The Paddle will 'click'
and remove from the head of the Potato Masher
for cleaning.
•
To replace, fit the Paddle and twist anti-clockwise
until it clicks into place.
Chopping Bowl Safety Seal (18)
The Chopping Bowl Blending Lid
Chopping Bowl Lid
Safety Seal. This is to prevent leakage from your
Chopping Bowl
storage.
(10)
you may
•
Always ensure the Safety Seal is in place before
use. Failure to do so could cause damage to the
appliance.
•
The Safety Seal only needs to be removed for
cleaning (if required). After cleaning ensure the
seal is reattached as directed before using your
Total Control Hand Blender Set.
(9)
and
•
When reattaching the Safety Seal, ensure that it is
pressed tightly into the first channel in the Lids
(see diagram). The 'lip' on the Safety Seal should
be pointed outwards, and not twisted within the
channel. Ensure the Safety Seal is correctly
located before use.
(14)
can be removed.
(4)
from the
(9)
and
(12)
both feature a rubber
(10)
when in use and during
Advertisement
Table of Contents
