Technical Specifications - Cambridge Audio A-BUS Table-Top Keypad Incognito BK10 Installation Manual

Cambridge audio incognito bk10 a-bus table-top keypad installation guide
Table of Contents

Advertisement

TECHNICAL SPECIFICATIONS

Input impedance
Frequency response
THD
S/N ratio
Volume control range
Bass control range
Treble control range
Balance control range
Preamp output
IR pass through
Speaker impedance
Power requirement
This guide is designed to make installing and using this product as easy as possible. Information in this
document has been carefully checked for accuracy at the time of printing; however, Cambridge Audio's policy is
one of continuous improvement, therefore design and specifications are subject to change without prior
notice. If you notice any errors please feel free to email us at: support@cambridgeaudio.com
This document contains proprietary information protected by copyright. All rights are reserved. No part of this
manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written
permission of the manufacturer. All trademarks and registered trademarks are the property of their respective
owners.
Incognito and Incognito Ready are trademarks of Cambridge Audio Ltd. All rights reserved.
© Copyright Cambridge Audio Ltd 2006
A-BUS and A-BUS Ready are registered trademarks of LeisureTech Electronics Pty Ltd Australia.
18 Incognito table-top keypad
45 k ohms
20Hz – 20kHz +/- 1dB
<0.2% @ 1W, 20Hz – 20 kHz
> 80 dB 'A' weighted
- 80 dB, 36 steps
+/- 16 dB, 2 dB steps
+/- 16 dB, 2 dB steps
+/- 40 dB, 9 steps either way
Variable level, follows volume setting
34–40 kHz and 54–58 kHz
modulation frequencies supported
4–8 ohms
24 V DC @ 1A max (supplied by hub)

Advertisement

Table of Contents
loading

Related Products for Cambridge Audio A-BUS Table-Top Keypad Incognito BK10

Table of Contents