Panasonic VIERA TH-L42U20A Operating Instructions Manual page 26

Menu Item
HDMI1 / 2 / 3 Input
Reset Sound
Defaults
Input
Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset
PC Settings
H-pos
V-pos
Reset DVI
Position
Settings
Off Timer
Child Lock
Favourites
Edit
Channel List Skips the unwanted channels or edits channels (p. 29, 31)
Auto Tuning Sets all Digital TV or Analogue TV channels automatically (p. 30, 31)
Manual Tuning Sets the TV channels manually (p. 30, 31)
Update
Channel List
New Channel
Message
Signal
Condition
Add MPEG-
4 AVC
Channels
Teletext
Input Labels Labels or skips each input terminal (p. 33)
Banner
Display
Timeout
Playing Time
Display
26
TH-L42U20A_EN.indd 26 TH-L42U20A_EN.indd 26
Adjustments / Configurations (alternatives)
Select to fit the input signal (Digital / Analogue) (p. 51).
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
●
HDMI input mode only
Press the OK button to reset the present settings of Mode, Balance,
Headphone Volume, and Surround in Sound Menu to the default.
Switches to a wide view
●
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Set to the minimum level if noise occurs.
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
●
Adjust after Clock adjustment
PC sync signal type (H & V / SOG)
H & V : by the horizontal and vertical signals from your PC
SOG : Sync on Green sync from your PC
Press the OK button to reset the present PC Setup settings to the default.
Adjusts horizontal position settings of DVI
Adjusts vertical position settings of DVI
Press the OK button to reset the present DVI Position settings to the
default.
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) (p. 13)
Locks a channel / AV input to prevent access to it (p. 32)
Creates list of favourite channels (Digital TV mode) (p. 29)
Updates the channel list with keeping your settings (Digital TV mode) (p. 30)
Selects whether to give a notification message when a new channel is
found (Digital TV mode) (Off / On) (p. 30)
Checks the Digital TV signal condition (p. 30)
Activates the reception of MPEG-2 and MPEG-4 AVC channels
●
Use this function if MPEG-4 AVC services start in your area.
●
All previous tuning setting are erased.
●
Once activated, this option is removed from the Digital TV Tuning Menu.
Teletext display mode (TOP(FASTEXT) / List) (p. 17)
Sets how long the information banner stays on screen (p. 14)
(0 (No display) / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 seconds)
Set to "On" to display a continuous record of time spent using Game mode
every 30 mins (Off / On)
●
This function is available when "Game" is selected in "Viewing Mode" (p. 24).
●
Set to the minimum level if noise occurs
4/2/2010 2:03:08 PM 4/2/2010 2:03:08 PM