Omega OM-CP-RFRHTemp2000A User Manual
  1. Manuals
  2. Brands
  3. Omega Manuals
  4. Data logger
  5. OM-CP-RFRHTemp2000A
  6. User manual

Omega OM-CP-RFRHTemp2000A User Manual

Wireless temperature and humidity data logger
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OM-CP-RFRHTEMP2000A
Wireless Temperature and Humidity Data Logger

Advertisement

Table of Contents
loading

Related Manuals for Omega OM-CP-RFRHTemp2000A

Summary of Contents for Omega OM-CP-RFRHTemp2000A

  • Page 1 OM-CP-RFRHTEMP2000A Wireless Temperature and Humidity Data Logger...

  • Page 2: Product Overview

    OM-CP-RFRHTemp2000A Product Overview The OM-CP-RFRHTemp2000A is a wireless temperature and humidity data logging and alarming system with LCD display. A base is included with the data logger for mounting purposes. Selection Buttons The logger is designed with 3 direct selection buttons: Scroll, Units and Wireless.

  • Page 3: Quick Start Steps

    To download your data, select the device, click the stop button, and then click the download button to view your report in the graph. Questions? For more details and instructions, please refer to the rest of this guide, visit us online at www.omega.com or contact us for support at 1 (800) 872-9436.
  • Page 4 Select New and enter a Rule name. Enter alarm the parameters using the drop down menus and selection circles. Select OK and choose the alarm to enable. The alarm bell is green when enabled and red when disabled. **Please refer to the Help file in the Omega software for more information regarding alarm settings**...

  • Page 5: Troubleshooting Tips

    Troubleshooting Tips Why are my devices not appearing? If your OM-CP-RFRHTemp2000A isn’t showing up in the Connected devices panel, or if you receive an error message while using the OM-CP-RFRHTemp2000A, try the following: • Check that your OM-CP-RFC1000-EXT is properly connected. For more information, see Troubleshooting Interface Cable problems (below).

  • Page 6: Product Maintenance

    Standard recalibration for the OM-CP-RFRHTemp2000A is one point at 25°C for the internal temperature channel, and two points at 25%RH and 75%RH for the humidity channel. Recalibration is recommended annually for any Omega data logger; a reminder is automatically displayed in the software when the device is due.
  • Page 7 WARNING: MAY LEAK, FLAME OR EXPLODE IF DISASSEMBLED, SHORTED, CHARGED, CONNECTED TOGETHER, MIXED WITH USED OR OTHER BATTERIES, AND/OR EXPOSED TO FIRE/HIGH TEMPERATURE. DISCARD USED BATTERY PROMPTLY, KEEP OUT OF REACH OF CHILDREN. Specifications subject to change. See Omega’s terms and conditions at www.omega.com...
  • Page 8 OM-CP-RFC1000-EXT Wireless Transceiver...
  • Page 9 Verify that the data loggers are in wireless transmission mode. (See Channel Programming steps above) On a Windows PC, launch the Omega data logger software program. All active data loggers will be listed in the software showing that the device(s) are recognized.

  • Page 10: Mounting Instructions

    OM-CP-RFC1000-EXT Mounting Instructions For best wireless performance, both the OM-CP-RFC1000-EXT and the Omega data loggers should be mounted in the same orientation. This usually means that the external antenna should be pointing straight up. The antenna can pivot to accommodate either a wall mount or a desk mount.

  • Page 11: Channel Programming

    OM-CP-RFC1000-EXT has a set of dip switches with which the channel may be programmed. Any Omega data logger or OM-CP-RFC1000-EXT that is on the same network are required to use the same channel. If they are not on the same channel, the devices will not communicate with one another.
  • Page 12 Troubleshooting Tips Why is the wireless data logger not appearing in the software? If the OM-CP-RFRHTemp2000A doesn’t appear in the Connected Devices panel, or an error message is received while using the OM-CP-RFRHTemp2000A, try the following: • Check that the OM-CP-RFC1000-EXT is properly connected. For more information, see Troubleshooting Interface Cable problems (below).
  • Page 13 Quick Start Manual OM-CP-RFC1000-EXT General Specifications Interface Type USB (to PC) / Wireless (to Data Logger) Operating Environment -20 to +85°C, 0 to 95%RH non-condensing LED Indicators Red & Green Enclosure Materials ABS Plastic (body), PVC Plastic (antenna) Dimensions Enclosure: 3.8” x 1.6” x 0.8” / Antenna: 7.2” Approvals FCC ID:OA3MRF24J40MC, IC#: 7693A-24J40MC Transmission Distance...

  • Page 14: Compliance Information

    OM-CP-RFRHTemp2000A Compliance Information • “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”...
  • Page 15 European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification. The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.

Table of Contents