LG 32LG30R Service Manual page 11

Hide thumbs Also See for 32LG30R:
Table of Contents

Advertisement

6. EDID
(The Extended Display Identification Data )
/DDC
(Display Data Channel)
* Caution
Use the proper signal cable for EDID Download
6-1. EDID DOWNLOAD
* Caution:
- Never connect HDMI & D-SUB Cable at the same time.
- Use the proper cables below for EDID Writing
For RGB EDID
* EDID Data
Item
Manufacturer ID
GSM
Version
Digital : 1
Revision
Digital :3
* LP81A HD Model EDID
<Analog : 128bytes>
C
<HDMI 1 : 256bytes> / <HDMI 2 : 256bytes>
The data is same without Physical address
C
F
-> Physical address(F) : HDMI 1 -> 10, HDMI 2 -> 20
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
download
For HDMI EDID
Condition
Data
1E6D
01
03
A
D
D
A
D
D
- Detail EDID Options are below (A, B, C, D, E, F)
A. Product ID
B. Serial No: Controlled on production line
C. Month, Year: Controlled on production line:
ex) Monthly: '09 '09
D. Model Name(Hex):
Model name
LG TV
E Checksum: Changeable by total EDID data
6-2. HDCP SETTING
(High-Bandwidth Digital Contents Protection)
- Connect D-sub Signal Cable to D-Sub Jack
- Input HDCP key with HDCP-key- in-program
- HDCP Key value is stored on EEPROM(AT24C64) which is
From "0x80" addresses of 0xA0 page
- AC off/ on and on HDCP button of MSPG925 and confirm
whether picture is displayed or not of using MSPG925
- HDCP Key value is different among the sets.,
7. Adjustment of White Balance
7-1. Purpose and Principle for adjustment
of the color temperature
- Purpose : Adjust the color temperature to reduce the
deviation of the module color temperature.
- Principle : To adjust the white balance without the saturation,
Fix the one of R/G/B gain to C0 and decrease the others.
B
7-2. Adjustment mode : Two modes of Cool
and Warm
(Medium data is automatically calibrated by the Cool data)
E
* Required Equipment
- Remote controller for adjustment
- Color Analyzer : CA100+ or CA-210 or same product (ch:9)
- Auto W/B adjustment instrument(only for Auto adjustment)
7-3. Connecting diagram of equipment for
measuring (For Automatic Adjustment)
B
E
- 11 -
Year: '2007 Ë '11'
Model Name(HEX)
00 00 00 FC 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20
LGE Internal Use Only

Advertisement

Table of Contents
loading

This manual is also suitable for:

32lg30r-ma

Table of Contents