Panasonic HC-V770 Operating Instructions Manual page 130

WX970
series/
j
When [REC FORMAT] is set to [4K MP4], when recording a motion picture in 4K Photo Mode
or during PRE-REC
j When saving the Highlight Playback scene or a manually edited scene
*1
j When copying
WX970M VX870M
*1 /
When copying between the SD card and the built-in memory, this restriction applies only if you
convert the recording format
≥ If you connect this unit to the TV when this unit is set to Recording Mode, a squealing sound
may be output. Before connecting this unit, set it to Playback Mode.
*2 The microphone may pick up the sound from the speakers, producing an abnormal sound.
≥ When connected to the TV, sound in Playback Mode is not output from this unit. Also, since the
volume cannot be adjusted with this unit, adjust the volume of the TV.
≥ Some screens, such as the menu screen, may be displayed in reduced sizes on the TV.
WX970 VX870
series/
≥
Image and audio is not output from this unit while using the Wi-Fi function.
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the images
correctly. (Check the TV setting.)
: [SETUP] # [TV ASPECT] # [4:3]
MENU
Example of images with a [16:9] aspect ratio
on a regular TV (4:3)
[TV ASPECT] setting
[16:9]
≥ If a wide-screen TV is connected, adjust the
aspect setting on the TV. (Refer to the
operating instructions of the TV for details.)
Refer to the following support site for information about Panasonic TVs with an SD card
slot for playing back your pictures.
http://panasonic.net/
≥ It may not be possible to play back scenes on the TV depending on the [REC FORMAT] or
[REC MODE].
≥ For details on how to play back, please read the operating instructions for the TV.
VX870
series
/performing [CONVERT TO MP4]/performing [Slow Speed Conversion]
V770M V770M
/
V770
series/
[4:3]
series
∫ To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen (operation
icon and time code etc.) can be displayed/not
displayed on the TV.
: [SETUP] # [EXT. DISPLAY] #
MENU
desired setting
[SIMPLE]
[DETAIL]:
[OFF]:
*3 This setting is only available in Motion
Picture Recording Mode or Still Picture
Recording Mode.
- 130 -
*3
: Information partially
displayed
Detailed information
displayed
Not displayed
*2