Coupon Gs1 Databar Output; Upc-E0 - Honeywell Voyager 1450g Series User Manual

Coupon GS1 DataBar Output

If you scan coupons that have both UPC and GS1 DataBar codes, you may wish to scan and output only the data from the GS1
DataBar code. Scan the GS1 Output On code below to scan and output only the GS1 DataBar code data. Default = GS1 Out-
put Off.
* GS1 Output Off

UPC-E0

UPC-E0 On/Off
Most U.P.C. bar codes lead with the 0 number system. To read these codes, use the UPC-E0 On selection. If you need to
read codes that lead with the 1 number system, use
* UPC-E0 On
UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format. Default = Off.
On
7 - 20
<Default All UPC-E Settings>
UPC-E1 (page 7-22). Default = On.
GS1 Output On
UPC-E0 Off
* Off