SOYO SY-7IWM/L V1.0 User Manual page 38

Hardware Installation SY-7IWM/L V1.0
3. Infrared (IR1)
Plug the 5-pin infrared device cable to the IR1 header. This will enable the
infrared transfer function. This Motherboard meets both the ASKIR and
HPSIR specifications.
Please install according to the following pin assignment:
Serial Infrared (IR1) Connector
IR1 Pin Assignment
1 2 3 4 5
VCC
IRTX
IRRX
GND
4. CD Line-in (J9)
This Motherboard provides two CD-Line in connectors. Please connect the
4-pin audio cable from your CD-ROM drive to either J9. (It fits in only
one, depending on the cable that came with your CD-ROM drive)
Please install according to the following pin assignment:
CD-IN: J9
1 2 3 4
GND
Right
Left
GND
34