6: Performing The Initial Set-Up - Sony Bravia KDL-42W670A Operating Instructions Manual

6: Performing the
initial set-up
1
Connect the AC power cord (mains lead) to
the AC adapter and plug the DC cable into
the DC IN terminal. Then, connect the TV to
your AC power outlet (mains socket).
2
Press =/1 on the TV. The illumination LED
will light up in white.
When you switch on the TV for the first time,
the Language menu appears on the screen.
~
• When you turn on the TV for the first time, the
TV requires some internal processing for
optimisation before you can perform the initial
setup. There will be no picture and sound,
and the illumination LED on the front of the TV
blinks white for about 40 seconds. Do not turn
off the TV during this process.
This process has been completed at the
factory for some TVs.
• The illumination LED lights up in different
colours according to the status of the TV. If
you do not wish to light up the illumination
LED, you can turn it off later. Press HOME,
then select "Settings" t "System Settings"
t "General Set-up" t "Illumination LED" t
"Off". You can also press OPTIONS, then
select "Illumination LED" t "Off".
14
GB
3
Press V/v/B/b to select an item, then press
.
Follow the instructions on the screen.
Programme Sorting: Changes the order of
analogue channels stored in the TV.
1
Press V/v to select the channel you want
to move to a new position, then press
2
Press V/v to select the new position for
the channel, then press
~
• You can also tune channels manually.
Network Set-up: Sets up the Internet
settings. If you do not access the Internet, or
to set up later, select "Skip". After you select
"Continue" or "Start" (depending on model)
at the Internet setup confirmation screen,
select "Auto" to connect to the network
automatically. Select "Custom" to connect
manually.
~
• If you use WEP security, select "Custom" t
"Wireless Set-up" t "Scan". Then, select the
network name (SSID) you want to connect.
If you cannot find the required network name,
select "[Manual Entry]" and press
network name.
• To set "Network Set-up" later, press HOME,
then select "Settings" t "Network" t
"Network Set-up".
• Use the optional USB Wireless LAN Adapter
to connect with your wireless router (or
access point) at 5GHz. Insert USB Wireless
LAN Adapter and set "Wi-Fi Direct" to "Off".
Press HOME, then select "Settings" t
"Network" t "Wi-Fi Direct" t "Off".
.
.
to enter