Automatic Volume Adjustment; Clear Voice; Digital Audio Output; Using Digital Audio Output - Sharp Aquos LC-42D63X Operation Manual

Watching TV

Automatic Volume Adjustment

Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Auto Volume", and then
3
press ENTER.
Press c / d to select "On", and then press
4
ENTER.

Clear Voice

This function emphasises speech against background
noise for greater intelligibility. It is not recommended for
music sources.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Clear Voice", and then
3
press ENTER.
Press c / d to select "On", and then press
4
ENTER.

Digital Audio Output

This function allows you to select your favourite audio output system.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option", and then press
2
ENTER.
Press a / b to select "Digital Audio Output",
3
and then press ENTER.
... DigitaI Audio Output
MENU [ Option
Option
AQUOS LINK Setup
DNR
Input Select
HDMI Audio Select

Output Volume Select

Auto Volume

Clear Voice

Digital Audio Output

Audio Only

D63X_en_f.indd 39 D63X_en_f.indd 39
4
Selected item
PCM
Dolby Digital

Using Digital Audio Output

It is possible to output audio through the DIGITAL AUDIO
OUTPUT terminal. PCM audio outputs from the terminal.
Optical fi bre cable
(commercially available)
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the
same audio from the speakers. (The audio of the content
you are viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output
some signals, depending on devices and software.
]
[Off]
[Auto]
[Digital]
[Fixed]
[On]
[Off]
[PCM]
[Off]
Press a / b to select your desired output
system, and then press ENTER.
PCM
Dolby Digital
Description
The optical output format is normally in PCM.
Dolby Digital audio will be output when
there is a Dolby Digital audio signal. The
output will be in PCM when there is no
Dolby Digital audio signal.
To optical digital input of external audio devices
39
2007/08/30 17:41:30 2007/08/30 17:41:30