Rear Panel; Attaching The Toroidal Ferrite Core To The Power - Samsung HT-F6500 User Manual

Getting Started

Rear Panel

SPEAKER OUTPUT
CONNECTORS
COOLING FAN
POWER
POWER CORD
* Connecting the FM Antenna
1. Connect the FM antenna supplied to the FM ANT Jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or
other rigid surface.
| NOTES |
\
Maintain a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation. Do not
obstruct the cooling fan or ventilation holes.
\
This product does not receive AM broadcasts.
Attaching the Toroidal Ferrite Core to the Power Cord of the Wireless
Receiver Module (SWA-6000)
* In case of HT-F6530W/F6550W
If you attach a Toroidal ferrite core to the power cord of the wireless receiver module, it will help to prevent RF
interference from radio signals.
1. Pull the fixing tab of the Toroidal ferrite core to open it.
2. Make a loop twice in the wireless receiver module power cord.
3. Attach the Toroidal ferrite core to the wireless receiver module power
cord as the figure shows and press it until it clicks.
• Insert the ferrite core as close to the Wireless Receiver Module as
possible.
12
|
English
SPEAKERS OUT
FRONT
FRONT
R L
SUBWOOFER CENTER
HDMI IN
SURROUND SURROUND
R L
FRONT FRONT L
R
SUBWOOFER CENTER
1 2
HDMI OUT HDMI IN
SPEAKERS OUT
HDMI OUT LAN TERMINAL
* In case of HT-F6530W/F6550W
AUX IN * FM ANTENNA
AUX IN FM ANT
LAN
L
OPTICAL
R
DIGITAL
AUDIO IN
EXTERNAL DIGITAL
AUDIO IN (OPTICAL)