Philips AW9000 User Manual page 13

7
Make sure that your iOS device is
connected to Philips_Install, and then go
back to Philips AirStudio+ Lite.
8
Wait until the password input box appears.
9
Enter the password of your home Wi-Fi
network, tap Done to finish input, and then
tap Next.
* If your Wi-Fi password contains such special
characters as #/:/;/', you need to change your
password.
10
Name your speaker as you like, and then
tap OK to connect AW9000 to your
home Wi-Fi network.
11
Wait until the power/status indicator on
AW9000 turns solid white.
» The following app screen appears.
» AW9000 is connected to your home
Wi-Fi network successfully.
EN 11