Lenovo G70-35 Hardware Maintenance Manual page 70

Hide thumbs Also See for G70-35:

Table of Contents

Lenovo G70-35 Hardware Maintenance Manual

Note: Applying labels to the base cover

The new base cover FRU is shipped with a kit containing labels of several

kinds. When you replace the base cover, you need to apply the following

label:

The following labels need to be peeled off from the old base cover, and need

to be put on the new base cover.

BIS label

KCC label

Brazil Label (BT)

Brazil Label (BT) or WLAN Label for ISRAEL or SIRIM BT Label or

SIRIM WLAN Label or BT Label for US/CA/TW or Indonesia

Label for BT or WLAN Label for US/CA/TW or WLAN Label for

INDONESIA

INDONESIA D-SIDE LABEL

Rating label (66 X 24 mm) or Print rating label (43 X 24 mm)

Rating label (43 X 24 mm)

For some models, you also need to apply one or two FCC labels. Check the

old base cover; if it has one or two FCC labels, find duplicates of them in the

label kit and apply them to the new base cover.

For the location of each label, refer to the following figure:

Table of Contents