Engine Oil
7.
Check the condition of the sealing washer on
the oil drain bolt.
Replace the washer every other time the oil
is changed.
Install the oil drain bolt and tighten to the
specified torque:
22 lbf·ft (30 N·m , 3.1 kgf·m)
8.
Pour the recommended oil into the crankcase,
approximately:
1.1 US qt (1.0 )
9.
Install the oil filler cap/dipstick securely.
10.
Start the engine and let it idle for 3-5
minutes. Stop the engine. Wait 2-3 minutes.
66
Servicing Your Honda
11.
With the motorcycle held upright on level
ground, check the oil level.
If needed, add oil (page
the upper level mark. (Do not overfill.)
12.
Check for oil leaks.
13.
Install the engine guard.
64
) until it reaches