Starting & Stopping The Engine; Preparation; Starting Procedure - Honda CRF230F 2004 Owner's Manual

Always follow the proper starting procedure
described below.
Your motorcycle can be started with the
transmission in gear by pulling in the clutch
lever before operating the starter.

Preparation

Before starting, insert the key and turn the
ignition switch ON.
Make sure that the transmission is in neutral.
Turn the fuel valve ON.
Starting & Stopping the Engine

Starting Procedure

To restart a warm engine, follow the procedure
for High Air Temperature.
Normal Air Temperature
−
10° 35°C (50° 95°F)
LEFT
SIDE
○ ○
Ａ Ａ
○ ○
Ｂ Ｂ
(1) choke lever
1. Pull the choke lever ( ) up all the way to
fully ON ( ). A
−
(1)
○ ○
Ｃ Ｃ
(A) fully ON
(B) detent position
(C) fully OFF
1
Basic Operation & Riding
(cont'd)
29