Common Windows Problems - Samsung ML-2550 User Manual

Message
Serial Error
* may be shown only if you
installed the optional serial
interface card.
Tray 1 Open
Tray 2 Open
Wait Image
Problem
"File in Use" message
appears during installation.
"Error Writing to LPTx"
message appears.
"General Protection Fault",
"Exception OE", "Spool32",
or "Illegal Operation"
messages appear.
N : Refer to Microsoft Windows 9x/Me/NT 4.0/2000/XP User's Guide that came with
OTE
your PC for further information on Windows error messages.
7.22
S P
OLVING ROBLEMS
Status
The printer detects a
serial interface error.
The Tray1 is open.
The Tray2 is open.
The firmware
programme in the
printer has been
damaged.

Common Windows Problems

Exit all software applications. Remove all software from the
StartUp Group, then restart Windows. Reinstall the printer
driver.
• Ensure that the cables are connected correctly, the
printer is on.
• If bi-directional communication is not turned on in the
driver, it will also cause this message.
Close all other applications, reboot Windows and try
printing again.
Set the baud rate the same as
the setting on your computer.
Close the Tray1 to clear the
message.
Close the Tray2 to clear the
message.
You need to download the
programme to the printer again.
Contact your local Samsung
dealer.
Possible Cause and Solution
Do this...