Lamp Replacement; Procedure - Chauvet Rogue R1 Beam User Manual

Setup

Lamp Replacement

Procedure

-8-
The Rogue™ R1 Beam is equipped with an Osram Sirius 132-W lamp. Follow the
procedure below to safely change the lamp.
Disconnect the product from power before opening.
1. Turn the product off and disconnect it from power. Wait at least 15 minutes for the
lamp to cool down.
2. Remove both head covers by removing 8 Phillips-head ¼-turn screws.
3. Orient the bottom of the moving head so that the fan is facing upward.
Rogue™ R1 Beam User Manual Rev. 2