Channel Scan - Cobra CXT545 C Owner's Manual

Mode Functions
Operation

Channel Scan

Your microTALK radio can automatically scan channels.
®
To scan channels:
Scan Button
1. Press and release the Scan button until the Scan
icon and the channel numbers appear
HI / LO
on the display.
2. Press and hold the Scan button to begin scanning
Scan Channels
channels.
The radio ignores specific privacy
codes while scanning channels.
The Scan icon will continue to be displayed when
Channel Button
HI / LO
scan is on. Your radio will continue to scan all
channels and stop if an incoming transmission is
detected. Your radio will remain on that channel for
2 seconds.
During scanning (while receiving an incoming transmission),
you can choose from the following:
a. Press and hold the Talk button to communicate on that channel.
Your radio will remain on that channel and return to Standby mode.
b. Press the Channel Up or Channel Down button to resume
scanning channels.
c. Press and hold the Scan button to return to Standby.
14
CXT545C_MANL_ENG_GIANT.indd 14-15
Introduction Operation
Privacy Code Scan
•
Your microTALK radio can automatically scan the Privacy Codes (either
CTCSS 01 through 38 or DCS 01 through 83) within one channel. Only
one set of privacy codes (CTCSS or DCS) can be scanned at a time.
To scan privacy codes:
Scan Button
1. While in Standby mode, press and release the
HI / LO
Scan button twice (CTCSS) or three times (DCS)
until the CTCSS or DCS icon and numbers are
flashing.
Channel Button
HI / LO
2. Press and hold the Scan button to begin scanning
privacy codes within the selected channel.
Select Channel
Scan Privacy Codes
The Scan icon will continue to be displayed when privacy code scan
is on. Your radio will continue to scan privacy codes and stop as an
incoming transmission is detected. Your radio will remain on that
channel/privacy code for 6 seconds.
Customer Assistance Warranty
Nothing Comes Close to a Cobra
®
15
3/4/15 1:17 PM
•