GE GLD8000 Series Owner's Manual page 18

English
• If the incoming water temperature is less than the recommended temperature or food
soils are heavy, the cycle will automatically compensate by adding time, heat and
water as needed.
NOTE: The sensor in your dishwasher monitors the soil level. Cycle time and/or water
usage can vary from the numbers above as the sensor adjusts the cycle for the
best wash performance.
17
Use this cycle for
china and crystal. This
cycle uses a light
wash and gentle dry.
During the heated dry,
the heating element
cycles on and off.
Pre- Main Rinse
Wash Wash
130°F
(55°C)
Use this cycle for a quick
wash and light dry to
clean up cookware prior
to entertaining. The
sensor adds water and
time to the cycle if
needed for maximum
cleaning. This cycle uses a
shortened dry time. Towel
drying may be needed.
Pre-
Main Rinse
Wash
Wash
Use this rinse cycle for
rinsing dishes, glasses
and silverware that will
not be washed right
away.
Pre- Main Rinse
Wash Wash
Use main
detergent
dispenser section.
Final Dry Minimum
Heated Time
Rinse (min)
53*
Use main
detergent
dispenser
section.
Final Dry Minimum
Heated Time
Rinse (min)
33*
Do not use
detergent with
this cycle.
Final Dry Minimum
Heated Time
Rinse (min)
12*
Water
Usage
(gal/L)
4.9/18
Water
Usage
(gal/L)
3.2/12
Water
Usage
(gal/L)
1.6/6.1