What To Do If; Troubleshooting By Yourself - AEG LAVATHERM 56740 User Manual

20

What to do if ...

What to do if ...

Troubleshooting by yourself

If, during operation, the error code
the machine off and on again. Reset programme. Press the START PAUSE button If the error
is still displayed, please inform your local Service Force Centre and quote the error code.
Problem
Dryer does not work.
Drying results unsatisfactory.
Loading door does not close.
When a button is pressed,
appears on the LCD.
Drum light does not work.
E...
plus number or letter) appears on the LCD: Switch
Possible cause
Mains plug is not plugged in or
fuse is not working correctly.
Loading door is open.
Have you pressed the START
PAUSE button?
Wrong programme selected.
Lint filters clogged.
Fluff filter clogged.
Heat exchanger clogged with
lint.
Overloading of laundry.
Ventilation slots in base area
covered up.
Residue on inside surface of
drum or drum ribs.
Conductance of water at in-
stallation site differs from
standard setting of machine.
Fine strainer not in place and/
or mesh filter not locked in
place.
Washing protection. After the
Err
start of the programme, the
option can no longer be set.
Programme selector in OFF po-
sition.
Defective light bulb.
Remedy
Plug in at mains socket. Check
fuse in fuse box (domestic in-
stallation).
Close loading door.
Press the START PAUSE button
again.
Select a different programme
the next time you dry (see "Pro-
gramme chart" chapter).
Clean lint filters.
Clean fluff filter.
Clean heat exchanger.
Observe recommended loading
volumes.
Uncover ventilation slots in
base area.
Clean inside surface of drum
and drum ribs.
Re-programme standard set-
ting for degree of drying (see
'Programming options' chap-
ter).
Install fine strainer and/or snap
large mesh filter into place.
Turn the programme knob to
OFF. Set the programme again.
Turn programme selector to
DRUM LIGHT or to any pro-
gramme.
Replace light bulb (see next
section).