Using The Control Panel - Samsung TD390 Series 3 User Manual

Getting Started
✎
The product colour and shape may vary depending on the model. The product's Controller, a small joy stick like
button on the rear right side of the TV, lets you control the TV without the remote control.
Selecting the Menu
Remote control sensor
Power on
Adjusting the volume
Selecting a channel
Using the function menu
Selecting the MENUm
Selecting the MEDIA.P
Selecting the SOURCEs
Power off (P)
✎
To close the Menu, MEDIA.P or Source, press the Controller for more than 1 second.
✎
When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the
controller. If you press it first, you cannot operate it to move the up/down/left/right directions.
Standby mode
Your product enters Standby mode when you turn it off and continues to consume a small amount of electric power. To
be safe and to decrease power consumption, do not leave your product in standby mode for long periods of time (when
you are away on vacation, for example). It is best to unplug the power cord.

Using the Control Panel

Selecting the Media Play
Selecting a Source
m R
Return
P
Power off
Function menu
Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjusts the volume by moving the controller from side to side when the power is on.
Select a channel by moving the Controller to the up and down directions when the
power is on.
To view and use the Function menu, press and release the Controller when the power is
on. To close the Function menu, press and release the Controller again.
With the Function menu visible, select the
(On Screen Display) Menu appears. Select an option by moving the Controller to the right. Move the
Controller to the right/left/up/down directions to make additional selections. To change a parameter,
select it, and then press the Controller.
With the Function menu visible, select
MEDIA.P main screen appears. Select an application by moving the Controller, and then pressing the
Controller.
With the Function menu visible, open the
Source screen appears. To select a source, move the Controller back and forth. When the source
you want is highlighted, press the Controller.
With the Function menu visible, select Power off (P) by pulling the Controller to the down direction,
and then press the Controller.
English - 13
TV Controller
MENUm by moving the Controller to the left. The OSD
MEDIA.P by moving the Controller to the up direction. The
SOURCEs by pushing the Controller to the right. The