Labelling Input Sources; Skipping Hdmi/Rgb Input; Colour System Settings - Sharp LC-37D85X Operation Manual

Table of Contents

Advertisement

Settings when using external devices

Labelling input sources

You can assign each input source a label as you
prefer.
Press TV/VIDEO to select the desired input
1
source.
Press MENU and the MENU screen displays.
2
Press c / d to select "Setup".
3
Press a / b to select "Input Label", and then
4
press ENTER.
Press a / b / c / d to select each character of
5
the new name for the input source, and press
ENTER.
External equipment name settings
A
B
C
D
K
L
M
N
U
V
W
X
0
1
2
3
Repeat until the name is fully spelt out.
6
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select "END", then press
ENTER to exit from the labelling menu.
INPUT SOURCE
TV
NOTE
• You cannot change labels if the input source is TV.
50
E
F
G
H
I
J
CLEAR
O
P
Q
R
S
T
BACK
Y
Z
+
-
.
_
4
5
6
7
8
9
END
(Example)
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
DVD
INPUT7
(Example)

Skipping HDMI/RGB input

This setting allows you to skip the HDMI or RGB input
on the input source selection operation.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Input Skip", and then
3
press ENTER.
Press a / b to select the Input (INPUT4 to
4
INPUT7) you wish to skip, and then press
ENTER.
INPUT4(HDMI)
INPUT5(HDMI)
INPUT6(HDMI)
INPUT7(RGB)
Press c / d to select "Yes", and then press
5
ENTER.
Press MENU to exit.
6

Colour system settings

You can change the colour system to one that is
compatible with the image on the screen.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Colour System", and
3
then press ENTER.
Press a / b to select a compatible video signal
4
system of your equipment, and then press
ENTER.
NOTE
• Factory preset value is "Auto".
• If "Auto" is selected, colour system for input signal is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
Skip input selection of HDMI
Yes
No
Colour system settings
Auto
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60

Advertisement

Table of Contents
loading

Table of Contents