Table of Contents
Advertisement
Using other functions
¢
v
v
(Select entry)
The following functions can be selected with
Add a new entry.
New Entry
Display the phone number.
Show Number
Edit or add to a saved number.
Use Number
Then dial or use other functions
with MENU.
Edit selected entry.
Edit Entry
Delete selected entry.
Delete Entry
Send a single entry to another
Send Entry
handset (page 5).
Delete all directory entries.
Delete List
Send the complete list to
Send List
another handset (page 5).
For speed dial, assign the cur-
Shortcut
rent entry to a key.
IP Dialling and VIP storage
You can store IP or VIP numbers on 0,2-9. Dial the
number by pressing and holding down the relevant
number key.
Storing the IP number
v
Press the control key
¢
OK
Entry
Please follow this sequence:
1 Enter the IP access number.
2 Insert "P" by pressing and holding the S key if
neccessary.
3 Enter IP number and password, end with #.
End with OK, then enter name, such as "IP"
Note:
The entry method may differ when using different
IP Cards. VIP numbers can be entered directly.
Setting the shortcut key
¢
u
Scroll to
MENU
Shortcut
(
,
a number
0,2-9)
for example
Using the shortcut key
By pressing and holding the shortcut key, the rele-
vant IP or VIP number will be dialled. (For example:
press and hold key 2, the IP number will be dialled,
then dial the long distance number)
Sending the directory to another handset
Preconditions:
◆
The sending and receiving handsets must both
be registered to the same base station.
¢
MENU
¢
¢
¢
MENU
OK
¢
u t
Scroll
o select
¢
:
Shortcut: 2
5
◆
The other handset and the base station can
send and receive directory entries.
¢
v
u
u
(Select entry)
¢
:
Send List
of the receiving handset)
Last number redial list
This list contains the ten last dialled numbers.
Dialling from the last number redial list
c
Press the key briefly.
u
Select entry.
c
Press the talk key again. The number is
dialled.
Managing entries in the last number redial list
c
Press the key briefly.
u
Select entry.
Press the display key.
MENU
You can select the following functions:
Use Number
Copy to Dir.
Delete Entry
New
Delete List
Calls list/answering machine list
When a new message arrives in the calls/answer-
ing machine list, a signal sounds and the display
blinks. The display also shows a message.
When you press the
played. If only one list contains new messages, this
will be opened automatically.
Calls list
Precondition: CLIP (page 4)
The numbers of the last 20 missed calls are saved.
Multiple calls from the same number are only
OK
saved once (the last call).
The numbers of the last 20 incoming calls are
saved. Multiple calls from the same number are all
saved.
The calls list is displayed as follows:
CallsList 01+02
Number of new entries + number of old, read entries
¢
¢
MENU
¢
~
OK
(Enter the internal number
¢
OK
(as in the directory, page 5)
Copy an entry to the directory
(as in the directory, page 5)
(as in the directory, page 5)
f
key, all the lists are dis-
Send Entry /
Advertisement
Table of Contents
