Ensuring Proper Air Circulation; Using Your Refrigerator; Setting The Controls - LG GR-B264MAW Owner's Manual

ENSURING PROPER AIR
CIRCULATION
In order to ensure proper temperatures, air must
flow between the refrigerator and freezer
sections. As shown in the illustration below, air
enters at top of freezer and circulates down.
From bottom of freezer, air is forced up to top of
refrigerator. Air enters refrigerator through top
vent, then circulates and exists at bottom, where
it returns to freezer.
MULTI-FLOW
• Multi-Flow means powerful and effective cooling
operation. This is especially noticeable when
new food is placed in the refrigerator
compartment.
• If water or foreign substances enter the cool air
vent while cleaning, efficiency will be lowered. In
addition, if gasket is damaged, efficiency may
be lowered because of escaping cool air.
Do not block any of cool air vents with food
packages. If the vents are blocked, airflow will be
interrupted and temperature and moisture
problems may occur.
IMPORTANT: Because air circulates between
both sections, any odors formed in one section
will transfer to the other. You must thoroughly
clean both sections to eliminate odors. To
prevent odor transfer and drying out of food, wrap
or cover foods tightly. (See the Food Storage
Guide section for details.)

SETTING THE CONTROLS

• Your refrigerator has two controls that let you
regulate the temperature in the freezer and
refrigerator compartments.
• Initially set the FRIDGE CONTROL at
3°C and the FREEZER CONTROL at –18°C.
Leave it at this setting for 24 hours (one day) to

USING YOUR REFRIGERATOR

stabilize. Then adjust the compartment
temperature as desired.
• Freezer control: –21°C to –13°C
When the setting is at a lower number, the
freezer compartment becomes colder. But the
refrigerator compartment becomes warmer
because less cold air flows into the refrigerator.
• Fridge control: 1°C to 8°C
The lower the number setting, the colder the
refrigerator compartment will become.
• Express Freeze:
Press the Express Freeze key and the
LED will turn on. This function will remain
activated for 24 hours and intensify the cooling
speed of freezer and increase the amount of ice.
Door Alarm
With this feature you will hear an alarm when the
freezer or refrigerator door is open for more than 1
minute.
These tones will repeat every 30 seconds.
The alarm is cancelled when the door is properly
shut. To activate or deactivate Door Alarm, press
the button Door Alarm.
CAUTION
Display Mode (For Store Use Only)
The Display Mode disables all cooling in the
refrigerator and freezer sections to conserve
energy while on display in a retail store. When
activated, OFF will display on the control panel.
To deactivate:
Open the Right hand Refrigerator door, then
while holding down the Fridge button continuously,
touch the Express Freeze button 3 times.
The control panel will been and the temperature
settings will change to confirm that the Display
Mode is deactivated. Use the same procedure to
activate the Display Mode.
Shabbath mode is the function designated for use
of the refrigerator during Shabbath.
• To set the Shabbath mode on, press the Shabbath
button for 3 seconds. Then, initially SB SBshows in
the display as well as lamp and alarm turn off.
• Shabbath mode will automatically turned off after 96 hours.
• To set the Shabbath mode off manually, press the
Shabbath button for 3 seconds.
• Shabbath mode maintains even when the
recovered from black-out.
electricity
NOTE: Turn off the ICE Maker before setting the
Shabbath mode on.
20
Shabbath
Hold 3sec.