JVC Everio GZ-EX355 Basic User's Manual page 15

The lamp does not flash
during battery pack
charging.
Operation disabled
since the POWER/
CHARGE lamp and the
ACCESS lamp are
blinking.
This unit heats up.
Warning Indications
Warning Indications
RECORDING FAILURE
DATA RECORDED FILE IS
TOO SMALL TO BE SAVED
（CONTINUE RECORDING?）
ERROR IN BUILT-IN
MEMORY!/MEMORY
CARD ERROR!
Check the remaining battery power.
0
(When the battery pack is fully
charged, the lamp does not flash.)
When charging in either a hot or cold
0
environment, ensure that battery is
being charged within the permitted
temperature range. (Otherwise,
charging may stop to protect the
battery pack.)
After closing the LCD monitor,
0
remove the battery and AC adapter.
Then, attach the battery and AC
adapter again, and turn on the power
by opening the LCD monitor. If these
operations won't solve the problem,
contact your JVC dealer or the JVC
service center.
This is not a malfunction. (This unit
0
may become warm when used for a
long time.)
Action
Turn off and on this unit again.
0
If the above does not solve the
0
problem, back up your files and
execute [FORMAT BUILT-IN MEM.]
or [FORMAT SD CARD] in the
[MEDIA SETTINGS] menu. (All data
will be deleted.)
When [TIME-LAPSE RECORDING] or
0
[STOP-MOTION REC] is stopped with
the recorded time less than "0:00:00:14",
the video will not be saved.
Turn off and on this unit again.
0
Remove the AC adapter and battery pack,
0
then remove and re-insert the SD card.
Remove any dirt from the SD card
0
terminals.
If the above does not solve the
0
problem, back up your files and
execute [FORMAT BUILT-IN MEM.]
or [FORMAT SD CARD] in the
[MEDIA SETTINGS] menu. (All data
will be deleted.)
-
5
-
-
Page
-
-
-
-
-
-
-
15