Getting To Know Your Router - Belkin N300 User Manual

GETTING TO KNOW YOUR ROUTER

Front Panel
A) Wired (LAN) Connectors
Connect computers and other wired network devices
to these ports using Ethernet cables.
B) Modem (WAN) Connector
Connect your modem to this port using an Ethernet cable.
C) Power Connector
Connect the included power supply to this jack.
D) Reset Button
This button is used to restart your Router in rare cases when it
functions incorrectly. Resetting the Router will preserve your settings.
This button may also be used to restore the factory default settings.
Please see the Troubleshooting section for more information.
E) Wi-Fi Protected Setup (WPS) Light
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection.
Off: Idle
Blinking Blue: The Router is listening for a WPS-
enabled computer or other device.
Solid Blue: The Router has made a secure
connection with the computer or other device.
Amber: A connection was not created.
25