Options Adjustments - Panasonic TH-42LFE7W Operating Instructions Manual

Options Adjustments

1
2
3
4
5
• The serial number of this device is displayed when "Display Serial Number" is selected in step 3.
Item
Set auto input switching for when there is no signal. (see page 45)
Input Search
On:
• Power on display
• Input signal switch display
On screen display
• No signal display
• Mute and the remaining time of off-timer after
Off:
Adjusts the input signal when the unit is turned on.
Off
Notes:
Initial input
• Only the adjusted signal is displayed. (see page 16)
• This menu is available only when "Input lock" is "Off".
Press
Off
Off:
On:
Initial VOL level
Notes:
• When "Maximum VOL level" is "On", the volume can only be adjusted between 0 and your maximum
• You can hear the changed volume regardless of your volume setting before opening the options menu
Press
Off
Off:
On:
Notes:
Maximum VOL level
• If the "Maximum VOL level" is set lower than the "Initial VOL level", the "Initial VOL level" automatically
• The volume display can go up to 100 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu
Locks the input switch operation.
Off
Input lock Notes:
• Only the adjusted signal is displayed (see page 16).
• Input switch can be used when this is set to "Off".
Press to display the SET UP menu.
Press to select "OSD Language".
Press for more than 3 seconds.
Press to select "Options".
Press to display the Options menu.
Press to select your preferred menu.
Press to adjust the menu.
Press to exit from Options menu.
Displays all the following on screen.
Hides all the items above from view.
PC DVI HDMI1
button to adjust the volume when the unit is turned on.
On
Sets normal volume.
Sets your preferred volume.
range.
if you adjust the volume when "Initial VOL level" is "On" and cursor is on the menu.
button to adjust the maximum volume.
On
Sets auto maximum volume.
Sets your preferred maximum volume.
becomes the same as the "Maximum VOL level".
if you adjust the volume when "Maximum VOL level" is "On" and cursor is on the menu.
PC DVI HDMI1
Options
Display Serial Number
Shipping
Adjustments
was pressed.
HDMI2
HDMI2
Options
Input Search
On screen display On
Off
Initial input
Initial VOL level Off 0
Maximum VOL level Off 0
Input lock Off
Button lock
Off
Remocon User level
Off
5V Charge
On
Options
Off-timer function
Enable
Initial Power Mode
Normal
ID select
0
Remote ID
Off
Serial ID
Off
Studio W/B
Off
Protocol 1
LAN Control Protocol
RS-232C/LAN Information Timing
Options 3/3
Power ON Screen Delay Off
Clock Display Off
Power On Message (No activity power off)
On
Function button assign 1 Signal
Function button assign 2
Screensaver
43 43
1/3
2/3