Recording Your Performance; Internal Memory - Yamaha TransAcoustic SHTA Owner's Manual

Chapter
4

Recording Your Performance

Recording Your Performance on the Internal Memory
You can record your performance on the internal memory of the unit. Recorded performances are saved as a MIDI
song (SMF0).
Note
• You can record up to 10 songs on the internal memory.
• You can record up to approximately 500 KB, which equates to a standard song of approximately 30 minutes in length, per one
recording.
• The recorded performances are preserved even if you turn the unit off.
• You can also use metronome when recording your performance (page 30).
1
Press the FUNC. button repeatedly to switch the
function to SONG.
The song number of the currently selected category appears on the
display.
2
Hold the FUNC. button for a second to switch to
the song category selection display.
The currently selected song category blinks on the display.
3
Press the +/YES or –/NO button to select "U." (user
song on the internal memory).
4
Press the FUNC. button to return to the song
selection display.
5
Press the REC button.
The REC lamp blinks and the unit turns into the recording standby
mode.
The smallest number of empty song (which contains no data) in the
selected song category is automatically selected.
Note
• If there is no empty song, the last song on the internal memory is selected.
The display shows the song number and "FUL" alternately.
• If the capacity of the memory is running out, "EnP" appears on the display.
You can start recording, but the capacity may become full during recording.
We recommend you to delete unnecessary files first (page 33), to ensure
sufficient capacity.
26
Hold