Applicable Standards And Reference Documentation; Regulatory Model Numbers; Standards; Electromagnetic Compatibility - Seagate ST400FM0323 Product Manual

2.0

Applicable standards and reference documentation

The drives documented in this manual have been developed as system peripherals to the highest standards of design and
construction. The drives depend on host equipment to provide adequate power and environment for optimum performance and
compliance with applicable industry and governmental regulations. Special attention must be given in the areas of safety, power
distribution, shielding, audible noise control, and temperature regulation. In particular, the drives must be securely mounted to
guarantee the specified performance characteristics. Mounting by bottom holes must meet the requirements of Section 10.3.
2.1

Regulatory Model Numbers

The following model numbers represent the indicated form factors and features of all configurations within the series:
Regulatory Models:
• ST800FM0183 - (represents drive size 2.5 inch x 15mm height)
• ST800FM0213 - (represents drive size 2.5 inch x 7mm height)
2.2

Standards

The Seagate 1200.2 SAS SSD family complies with Seagate standards as noted in the appropriate sections of this manual and the
Seagate SAS Interface Manual, part number 100293071.
The drives are recognized in accordance with UL 60950-1, EN60950-1 and IEC 60950-1. Product also fulfills the requirements of IEC
62368-1.
The security features of Self-Encrypting Drive models are based on the "TCG Storage Architecture Core Specification" and the "TCG
Storage Workgroup Security Subsystem Class: Enterprise_A" specification with additional vendor-unique features as noted in this
product manual.
2.2.1

Electromagnetic compatibility

The drive, as delivered, is designed for system integration and installation into a suitable enclosure prior to use. The drive is supplied
as a subassembly and is not subject to Subpart B of Part 15 of the FCC Rules and Regulations.
The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides reasonable shielding.
The drive is capable of meeting the Class B limits of the FCC Rules and Regulations of the Canadian Department of Communications
when properly packaged; however, it is the user's responsibility to assure that the drive meets the appropriate EMI requirements in
their system. Shielded I/O cables may be required if the enclosure does not provide adequate shielding. If the I/O cables are external
to the enclosure, shielded cables should be used, with the shields grounded to the enclosure and to the host controller.
2.2.1.1 Electromagnetic susceptibility
The drive as delivered is tested to meet susceptibility requirements in a representative enclosure. It is the responsibility of those
integrating the drive within their systems to perform those tests required and design their system to ensure that equipment
operating in the same system as the drive or external to the system does not adversely affect the performance of the drive. See
Section 6.2.1, DC power requirements.
Seagate 1200.2 SAS SSD Product Manual, Rev. A 8