Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
B
C
A
G
Figure 1. Headstock controls (right).
A. ON/OFF Switch: Turns motor ON/OFF.
B. Light Switch: Turns work light ON/OFF.
C. Headstock: The cast-iron upper portion of
the drill press, which houses the quill and
work light, and supports the motor and belt
housing.
D. Belt Tension Lever: Adjusts motor location
to increase/decrease belt tension.
-4-
manual
BEFORE
D
E
F
E. Belt Tension Locks: Two knobs on each
side of headstock lock motor in place.
F.
Table Height Crank: Raises/lowers table.
G. Table Rotation Lock Lever: Locks table
rotation.
E
H
M
Figure 2. Headstock controls (left).
H. Spindle Return Spring: Automatically
returns quill into headstock.
I.
Depth Stop: Limits quill travel to a pre-set
drilling depth.
J.
Quill: Houses the spindle and bearings.
K. Chuck: Accepts drill bits with shanks from
⁄
" to
⁄
" and uses a JT-3 key.
3
5
64
8
L.
Scale: Displays current table-tilt angle.
M. Column Lock Lever: Locks table height.
Model G7943/G7944 (Mfd. Since 09/17)
I
J
K
L
Advertisement
Table of Contents
